List of Publications of Prof. Khan Mahmud Amanat

International Journal Papers

  1. Amanat K.M. and Tanabe T.,  “Investigation of Mode-I Fracture of Early Age Concrete by a Non-Local Plasticity Approach,” Japan Soc. Civ. Eng. (JSCE) J. Mat. Conc. Struct. Pvmnt., No.557/V-34, 135-144, February, 1997.

  2. Amanat K.M. and Tanabe T., “Study of Fracture Energy Characteristics of Early Age Concrete by a Non-local Plasticity Approach,” Japan Soc. Civ. Eng. (JSCE) J. Mat. Conc. Struct. Pvmnt. No.571/V-36, 235-244, August, 1997.

  3. Amanat K.M., Enam M. B., “Study of the Semirigid Properties of Reinforced Concrete Beam-Column Joints,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh, Vol. CE 27, No. 1, 1999.

  4. Amanat K.M., Ahmad S., “A New Design Basis for Free Standing Stairs,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 29, No.1, 2001.

    Note: The above paper received best paper award of Institution of Engineers, Bangladesh in 2002.

  5. Ahmed B., Amanat K.M., Safiullah A.M.M. and Choudhury J.R., “Causes of Cracking of Culverts on Filled Soil and Their Performance after Repair,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 30, No.1, 2002.

    Note: The above paper received best paper award of Institution of Engineers, Bangladesh in 2003.

  6. Amanat K.M, Afrin R, “Investigation of Sway Characteristics of RC Frames in Presence of Randomly Distributed Infill,” Journal of Science and Engineering, Stamford University, Bangladesh, July 2004.

  7. Azam, H.M.M, Amanat, K.M., “Effect of Infill as a Structural Component on the Column Design of Multi-Storied Building,” UAP Journal of Civil and Environmental Engineering, Vol 1, No. 1, 2005.

  8. Amanat K.M. and Hoque E. -  A Rationale for Determining the Natural Period of RC Building Frames Having Infill, Engineering Structures, Vol 28, pp.495-502, Elsevier, 2006.

  9. Amanat K.M., Alam M.M.M., Alam M.S., “Experimental Investigation of the Use of Ferrocement Laminates for Repairing Masonry in Filled Rc Frames,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 35, No.2, 2007.

  10. Haque, S, Amanat, K.M., “Seismic Vulnerability of Columns of RC Framed Buildings with Soft Ground Floor,” International Journal Of Mathematical Models And Methods In Applied Sciences, NAUN, Issue 3, Vol. 2, ISSN: 1998-0140, (Online: http://www.naun.org/journals/m3as/), 2008.

  11. Alam, M.S., Nehdi, M., Amanat, K.M., “Modelling and Analysis of Retrofitted and Un-Retrofitted Masonry-Infilled Rc Frames under in-Plane Lateral Loading,” Structure and Infrastructure Engineering, Vol. 5, no. 2, pp. 71-90, 2009.

  12. Alam, A.K.M.J., Amanat, K.M., Seraj, S.M., “An Experimental Study on Punching Shear Behavior of Reinforced Concrete Slabs,” Journal of Advances in Structural Engineering, Multi-Science Publishing Co Ltd, Vol.12, No. 2, April 2009.

  13. Alam, A.K.M.J., Amanat, K.M., Seraj, S.M., “An Experimental Investigation of Edge Restraint on Punching Shear Behavior of Rc Slabs,” IES Journal Part-A: Civil and Structural Engineering, Vol. 2, No. 1, Print ISSN: 1937-3260, Online ISSN: 1937-3279, 2009.

  14. Haque, S. and Amanat, K.M., “Strength and Drift Demand of Columns of RC Framed Buildings with Soft Ground Story,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 37, pp. 99-110. 2009.

  15. Quayyum, S, Nazmul, I.M., Iasmin, M.M., Amanat, K.M., “Effects of Randomly Distributed Infill on the Columns of Reinforced Concrete Frames with Soft Ground Storey,” International Journal of Structural Stability and Dynamics (IJSSD), Volume: 10, Issue: 3, pp. 555-569, DOI: 10.1142/S0219455410003610, Print ISSN: 0219-4554, Online ISSN: 1793-6764, 2010.

  16. Hossain, K.A., Amanat, K.M., “Effect of Span Length on the Dynamic Amplification Factor in the Deck of Concrete Box Girder Bridges,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE  39 (1) pp. 59-75, 2011.

  17. Tafheem, Z., and Amanat, K.M. "Modelling and Analysis of a Three Spanned Concrete Deck-girder Bridge Under Seismic Loading", International Journal of Civil and Structural Engineering, Vol. 2, No. 2, pp. 604-613, 2011 [ISSN: 0976-4399; DOI: 10.6088/ijcser. 00202010135]

  18. Uddin, M.A., Jameel, M., Sobuz, H.R., Hasan, N.M.S., Islam, M.S., Amanat, K.M., “Effect of Curing Time on Compressive Strength of Composite Cement Concrete,” Applied Mechanics and Materials, Trans Tech Publications, Switzerland, Vols 204-208, pp 4105-4109, doi: 10.4028/www.scientific.net/AMM.204-208.4105, 2012

  19. Alam, A.K.M.J., Amanat, K.M., "Finite Element Simulation on Punching Shear Behavior of Reinforced Concrete Slabs," ISRN Civil Engineering Journal, Article ID 501816, 9 pages, doi:10.5402/2012/501816, 2012.

  20. Tasmim, R. and Amanat, K.M., “A Rational Estimation of Earthquake Base Shear for Buildings with Soft Ground Floor,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 41, pp. 71-80, June 2013.

  21. Alam, A.K.M.J and Amanat, K. M, “FE Analysis on the Effect of Flexural Steel on Punching Shear of Slabs”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 6, Page 2878-2901, 2013

  22. Alam, A.K.M.J. and Amanat, K.M., “Effect of Reinforcement on Punching Shear of Multipanel Flat Slab,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 41, pp. 123-137, December 2013.

  23. Alam, A.K.M.J and Amanat, K. M., “Investigation on Punching Shear Behaviour of Multi-Panel Flat Slab”, International Journal of Structural Engineering, Vol. 5, No. 3, pp 189-206. 2014.

  24. Devi, U. and Amanat, K.M., "Non-Linear Finite Element Investigation on the Behavior of CFRP Strengthened Steel Square HSS Columns under Compression," International Journal of Steel Structures, Springer, ISSN: 1598-2351, Vol. 15, Issue 3, pp 671-680, September 2015.

  25. Bashar, I., Amanat, K.M., “Numerical Investigation of Ultimate Axial Capacity of  Eccentrically Loaded Steel Angles,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 42 (2), pp.217-232, 2015.

  26. Devi, U. and Amanat, K.M., “Numerical Simulation of Steel HSS Columns Strengthened Using CFRP,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 42(2), pp.209-216, 2015.

  27. Tafheem, Z., Amanat, K.M., “Finite Element Investigation on the Behavior of Bolted Flanged Steel Pipe Joint Subject to Bending,” Journal of Civil Engineering, The Institution of Engineers, Bangladesh. Vol. CE 43 (1), pp.79-91, 2015.

  28. Zerin, A.I., Hosoda, A., Salem, H. and Amanat, K.M., "Seismic Performance Evaluation of Masonry Infilled Reinforced Concrete Buildings Utilizing Verified Masonry Properties in Applied Element Method," Journal of Advance Concrete Technology, Japan Concrete Institute, Vol. 15, pp.227-243, 2017.

  29. Khan, M.T., Jahan, I. and Amanat, K.M., “Splitting Tensile Strength of Natural Aggregates, Recycled Aggregates and Brick Chips Concrete," Proceedings of the Institution of Civil Engineers – Construction Materials,  ISSN 1747-650X, E-ISSN 1747-6518, https://doi.org/10.1680/jcoma.18.00049, Oct. 2018.

  30. Raka, T.M. and Amanat, K.M., “Non-Linear Finite Element Investigation on the Behavior of Cold-Formed Plain Lipped C-Section in Shear, and Combined Bending and Shear,” Journal of Materials and Engineering Structures, http://revue.ummto.dz/index.php/JMES/article/view/1850/pdf, 6 (2019) 83–91, e-ISSN: 2170-127X, 2019.

  31. Raka, T.M. and Amanat, K.M., “Parametric Study with FE Model of Cold-Formed Plain Lipped C-Section in Shear, and Combined Bending and Shear,” Journal of Materials and Engineering Structures,  (Date accepted : 2019-01-02, http://revue.ummto.dz/index.php/JMES/announcement/view/19 ), e-ISSN: 2170-127X, 2019.

  32. Alam, M.T. and Amanat, K.M., “Seismic Response of Randomly Infilled Reinforced Concrete Frames with Soft Ground Storey,” Australian Journal of Civil Engineering, Vol. 18, No. 2, pp.153-163, Taylor and Francis,  https://doi.org/10.1080/14488353.2020.1745617, 2020.

  33. Saha, A. S. and Amanat, K.M., “Rebound Hammer Test to Predict In-situ Strength of Concrete Using Recycled Concrete Aggregates, Brick Chips and Stone Chips,” Journal of Construction and Building Materials, Vol.268, Elsevier, https://doi.org/10.1016/j.conbuildmat.2020.121088, 2021.

  34. Hossain, M.M., Tafheem, Z. and Amanat, K.M., “Experimental Investigation on Bolted Flanged Steel Pipe Joint Subjected to Flexure,” International Journal of Structural Engineering, Vol. 11, No.2, pp.189-203, Inderscience Enterprises Ltd., 2021. DOI: 10.1504/IJSTRUCTE.2021.114265. 

 

Refereed Conference Proceedings

  1. Amanat K.M. and Tanabe T., “Applicability of One Dimensional Gradient Plasticity in Identifying Fracture Process of Concrete,” Proc. Japan Conc. Inst. (JCI), 17, p.1341-1346, 1995.

  2. Amanat K.M. and Tanabe T., “Numerical Study on Fracture Process of Concrete by Gradient Plasticity Models,” Proc. of International Symposium on New Development in Concrete Science and Technology, Southeast University, Nanjing, China, Sept., 1995

  3. Gupta S., Yamamoto H., Amanat K.M. and Tanabe T., “Limitation of Incremental Integral Non-local Formulation for Strain Localization Problem,” Proc. of International Symposium on New Development in Concrete Science and Technology, Southeast University, Nanjing, China, Sept., 1995

  4. Amanat K.M. and Tanabe T., “Evaluation of Fracture Energy of Early Age Concrete by a Non-Local Plasticity Model,” Proc. Japan Conc. Inst. (JCI)., 18, p.467-472, 1996

  5. Amanat K.M. and Tanabe T., “A Non-local Approach for the Estimation of Fracture Energy of Young Age Concrete,” Transaction of Japan Conc. Inst. (JCI), 1997.

  6. Amanat K.M. and Tanabe T., “Crack Spacing Analysis of Reinforced Concrete by Gradient Plasticity Model,” Proc. of Japan Conc. Inst. (JCI), 19, 1997

  7. Amanat K.M. and Tanabe T., “Non Local Computational Modeling of the Softening Behavior of Early Age Concrete,” FRAMCOS-3 Proceedings, The Third International Conference on Fracture Mechanics of Concrete and Concrete Structure, Gifu, Japan, 1998.

  8. Amanat K.M., Ahmed B, Enam M. B., “Computational Investigation of the Semi-rigid Properties of a RC Beam-Column Joint,” Proceedings of the Civil and Environmental Engineering Conferences – New frontiers and Challenges, AIT, Bangkok, Thailand, November, 1999.

  9. Ahmed B, Amanat K.M., Hasan M.M., “Deflection Calculation of Semi-Rigidly Connected Beams Subjected to Center Point Loading,” Proceedings of the Civil and Environmental Engineering Conferences – New frontiers and Challenges, AIT, Bangkok, Thailand, November, 1999.

  10. Amanat K.M., Seraj, S.M., Hodgson R.L.P., “Experimental Investigation of the Wind Resistance Characteristics of Different Types of Rural Houses of Bangladesh,” Proceedings of the First Annual Paper Meet and International Conference on Civil Engineering, The Institution of Engineers, Bangladesh, Nov. 2001.

    Note: The above paper received best paper award of Institution of Engineers, Bangladesh in 2001

  11. Amanat K.M., Hoque E., “A Reappraisal of Time Period Formulas of Design Codes for Framed RC Buildings,” Proceedings of the Sixth International Conference on Computational Structures Technology and the Third International Conference on Engineering Computational Technology, Prague, Czech Republic, Ed. B.H.V Topping and Z. Bittnar, Civil-Comp Press, UK, ISBN 0-948749-83-0, doi:10.4203/ccp.75.45, ISSN 1759-3433, September 2002.

  12. Amanat K.M., Hoque E., “Rational Estimation of the Period of RC Frames Having Infill,” System-based Vision for Strategic and Creative Design – Proceedings of the 2nd International Structural Engineering and Construction Conference (ISEC-02), Rome, September 2003.

  13. Amanat, K.M. and Ali, M., “Effect of Infill of Fundamental Period of Vibration of RC Frames,” Proceedings of the Second Annual Paper Meet and International Conference on Civil Engineering, The Institution of Engineers, Bangladesh, July 2003.

  14. Amanat K.M. and Alam M.S., “Investigation of the Stability of A Steel Truss Supported Glass Tower,” Proceedings of the Second Annual Paper Meet and International Conference on Civil Engineering, The Institution of Engineers, Bangladesh, July 2003.

  15. Alam, M.S., and Amanat, K.M., “FE Modeling Scheme to Simulate the Retrofitting Effect of Masonry Infill with Ferrocement Overlay”, Proc. of the 2nd Int. Conf. on Protection of Structures Against Hazards, Singapore, pp. 297-301, 2-3 December, 2004.

  16. Alam, M.S., Nehdi, M.  and Amanat, K.M., “In-plane Lateral Load Strength of Masonry Infilled RC Frames”, Proc. of the 7th International Conference on Multipurpose High-Rise Towers and Tall Buildings, Dubai, paper IFHS-210, pp.16, 2005.

  17. Haque, S, Amanat, K.M., “Behavior of Columns of RC Framed Buildings with Soft Ground Floor Subjected to Earthquake Load,” Computational Engineering in Systems Applications – Selected Papers from the WSEAS Conferences in Heraklion, Greece, July 22-25, 2008, ISBN: 978-960-474-000-00, ISSN 1790-2769. (Originally part of Proceedings of the WSEAS Engineering Mechanics, Structures, Engineering Geology (EMESEG ’08) Conference, Heraklion, Crete, Greece, 22nd – 24th July 2008. ISBN 978-960-6766-88-6. ISSN 1790-2769.)

  18. Choudhury, M.R., Quayyum, S., Amanat, K.M., “Modeling and Analysis of a Bolted Flanged Pipe Joint Subjected to Bending,” Computational Engineering in Systems Applications – Selected Papers from the WSEAS Conferences in Heraklion, Greece, July 22-25, 2008, ISBN: 978-960-474-000-00, ISSN 1790-2769. (Originally part of Proceedings of the WSEAS Engineering Mechanics, Structures, Engineering Geology (EMESEG ’08) Conference, Heraklion, Crete, Greece, ISBN 978-960-6766-88-6. ISSN 1790-2769.), 22nd – 24th July 2008.

  19. Ahmed, A.U., Amanat, K.M., “Need of 3D Finite Element Analysis for Buried RC Box Culvert In Fill Soil,” Proceedings of CSCE 2008 Annual Conference, Quebec, Canada, June 2008.

  20. Amanat, K.M., Haque, S., “Behavior of Columns of RC Framed Buildings with Soft Ground Floor Subjected to Earthquake Load,” INTERNATIONAL CONFERENCE: Sustainable Architecture & Urban Design 2010, School of Housing, Building and Planning, USM, Malaysia, 3-4th March 2010.

  21. Amanat, K.M., Hossain, K.A., “Dynamic Amplification Factor for the tip Deflection of the Cantilever Slab of Concrete of Box Girder Bridges”, Second International Conference on Construction in Developing Countries (ICCIDC–II): Advancing and Integrating Construction Education, Research & Practice, Cairo, Egypt, August 3-5, 2010.

  22. Hossain, K.A., Amanat, K.M., “Dynamic Amplification of Transverse Stress at the Root of Cantilever Slab of RC Box Girder Bridges,” Advances in Bridge Engineering – II, IABSE-JSCE Joint Conference, Dhaka, Bangladesh, 8-10 August, 2010

  23. Amanat, K.M., Amin, A.F.M.S, Hossain, T.R., Kabir, A., Rouf, M.A., “Cracks in the Box Girders of Bongobondhu Jamuna Multipurpose Bridge - Identification of Causes Based on FE Analysis,” Advances in Bridge Engineering – II, IABSE-JSCE Joint Conference, Dhaka, Bangladesh, 8-10 August, 2010.

  24. Alam, A.K.M.J. and Amanat, K. M., “Effect of Flexural Reinforcement on Punching Shear Behavior of RC Slabs”, Proceedings of the First International Conference on Performance-based and Life-cycle Structural Engineering (PLSE 2012), Hong Kong, China. Page 1851-1859, Dec. 2012.

  25. Khan, M.R.I., Khan, Z.H., Raiyan, M.F. and Amanat, K.M., "Minimum Slab Thickness of RC Slab to Prevent Undesirable Floor Vibration ," The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), pp. 1886-1899, Jeju, Korea, Sept. 8-12, 2013.

  26. Khan, Z., Amanat, K.M., “Riverbed Scouring Effect in Bridge Pile Foundation during Earthquake,” Proceedings of the Geo-Shanghai 2014 Conference, Geo-Institute of ASCE, DOI: 10.1061/9780784413425.035, ISBN: 9780784413371, 2014.

  27. Hossain, F. M. Z. and Amanat, K.M., “Behaviour of Exterior Frames of Buildings Under Blast Loading with Special Reference to Theaters and Halls,” Proceedings of the 3rd International Conference on Protective Structures (ICPS3), Newcastle, Australia, M.G. Stewart & M.D. Netherton (Eds.), 3-6 February 2015.

  28. Zerin, A.I., Amanat, K.M., “Effectiveness of Ferrocement Laminates as a Repair and Retrofitting Material for Brick Infilled RC Frames,” Proceedings of International Conference on the Regeneration and Conservation of Concrete Structures, Japan Concrete Institute, Nagasaki, Japan, June 1st-3rd, 2015.

  29. Zerin, A.I., Salem, H., Hosoda, A., Amanat, K.M., “Verification of Masonry Properties in AEM Analysis for Brick Infilled Reinforced Concrete Frames,” Proc. Japan Conc. Inst. (JCI), 37 (2), p.79-84, 2015.

  30. Amin, A.F.M.S., Amanat, K.M., Islam, M.M. and Bhuiyan M.A.R., “Structural Adequacy of a Deformed Prestressed Concrete Girder in Khodarhat Bridge: an Assessment Utilizing Filed Vibration Data and FE Computations,” Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, Dhaka, Bangladesh, August 21-22, 2015.

  31. Amin, A.F.M.S., Amanat, K.M., Ahsan, R and Rhmatullah, R., “Renovation of Two Century-Old Steel Truss Railway Bridges to Increase the Vertical Clearance,” Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, Dhaka, Bangladesh, August 21-22, 2015.

  32. Amin, A.F.M.S., Islam, M.M., Fuad, N., Choudhury, M.S.I, Hasnat, A. and Amanat, K.M., “Shift in the Natural Frequencies of the Deck of Bangabandhu Jamuna Bridge Due to CFRP Strengthening,” Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, Dhaka, Bangladesh, August 21-22, 2015.

  33. Bashar, I., Amanat, K.M., “Finite Element Simulation of Ultimate Axial Capacity of Eccentrically Loaded Steel Angles,” CICM 2015 – Proceedings of the First International Conference on Advances in Civil Infrastructure and Construction Materials, MIST, Dhaka, Bangladesh, 14–15 December 2015.

  34. Alam, M.F., Amanat, K.M., Tamanna, A., “Assessment of Moment Magnification for Column in Flat Plate RCC Building Considering Geometric Nonlinearity,” International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD-2015), Dhaka University of Engineering & Technology (DUET), Gazipur, Bangladesh, 11-13 December 2015.

  35. Zerin, A.I., Hosoda, A., Hadhoud, H. and Amanat., K.M., "AEM Modeling and Analysis for Seismic Evaluation of Masonry Infilled Reinforced Concrete Buildings," Proceedings of the International Symposium on Concrete and Structures for Next Generation (IOS 2016), Tokyo, May 16-18, 2016.

  36. Zerin, A.I., Hosoda, A., Hadhoud, H. and Amanat., K.M., “Seismic Performance Evaluation of Existing Masonry Infilled Reinforced Concrete Framed Buildings in AEM,” 11th FIB PhD Symposium, Tokyo, Japan, Aug. 29-31, 2016.

  37. Amanat, K. M., Hoque, R. M. M. “Numerical Simulation of Elliptical Hollow Section Column”, 1st Bangladesh Civil Engineering Summit 2016, BUET, 2016.

  38. Raka, T.M. and Amanat, K.M., “A Numerical Study by Constructing a Finite Element Model of a Simply Supported Beam with Cold-Formed Steel Section,” 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), CUET (www.cuet.ac.bd), Chittagong, Bangladesh, 19 –21 December 2018.

  39. Akter, M. and Amanat, K.M., “Non-Linear Finite Element Investigation of the Lateral Load Capacity of Stiffened SPSW for Various Aspect Ratios” Proceedings, International Conference on Disaster Risk Management (ICDRM), BUET-Japan Institute of Disaster Prevention & Urban Safety (BUET-JIDPUS), Dhaka, Bangladesh, January 12-14, 2019.

  40. Aziz, I. and Amanat, K.M., “Numerical Simulation of Seismic Behavior of Replaceable Steel Coupling Beam” Proceedings, International Conference on Disaster Risk Management (ICDRM), BUET-Japan Institute of Disaster Prevention & Urban Safety (BUET-JIDPUS), Dhaka, Bangladesh, January 12-14, 2019.

  41. Sakib, M.S., Sarothi, S.Z., Hasan, M.A., Akther, A., Rabbi, T. and Amanat., K.M.,”A Comparative Study of BNBC 1993 and 2017 Provisions for the Design of Multistoried Steel Buildings in High Wind and High Seismic Zone,” International Conference on Structural Engineering Research (iCSCER- 2019), Global Circle for Scientific, Technological and Management Research (GCSTMR), Dhaka, Bangladesh, Jan. 19-22, 2019.

  42. Sarothi, S.Z., Sakib, M.S., Hasan, M.A., Akther, A., Rabbi, T. and Amanat., K.M.,” Comparative Analysis of RC Frame Structures Following BNBC 1993 and 2017 Versions of Code for High Seismic and High Wind Zone,” International Conference on Disaster Risk Management (ICDRM 2019), BUET-JAPAN Institute of Disaster Prevention & Urban Safety (BUET-JIDPUS), Dhaka, Bangladesh, Jan. 12-14, 2019.

  43. Hoque, R. M. M., Amanat, K. M., Dutta, D. and Hossain, M. Z. “Self-Centering and Overturning Ratio Effect on Self-Centering Steel Rocking Frames,” International Conference on Structural Engineering Research 2019, Global Circle for Scientific, Technological and Management Research (GCSTMR), Dhaka, Bangladesh, 2019.

  44. Hoque, R. M. M., Amanat, K. M. and Dutta, D. “Optimum Geometric Configuration of Fuse For Seismic Force Resisting Rocking Frame”, International Conference on Disaster Risk Management, BUET-JAPAN Institute of Disaster Prevention & Urban Safety (BUET-JIDPUS), Dhaka, Bangladesh, 2019.

  45. Hoque, R. M. M., Amanat, K. M., Huq, R. S. and Asif, M. M. “Numerical Simulation on Behaviour of Steel Elliptical Hollow Steel Section Columns under Compression”, Global Circle for Scientific, Technological and Management Research (GCSTMR), International Conferecne on Structural Engineering Research 2019, Dhaka, Bangladesh, 2019.  

 

RESEARCH MONOGRAPHS AND OTHER WORKS COMPLETED AND CONTRIBUTIONS AS STANDARD PUBLICATIONS

  1. WIND TUNNEL TEST ON MODELS OF RURAL HOUSES OF BANGLADESH, 2000
    Sponsor: DFID and The British Council
    Research Associates:  Dr. RLP Hodgson, Prof. Dr. Salek M. Seraj

  2. EVALUATION OF SEISMIC DESIGN PARAMETERS FOR REINFORCED CONCRETE FRAMES HAVING BRICK MASONRY INFILLS, 2001
    Sponsor: CASR, BUET

  3. EXPERIMENT ON INFILL FRAME STRUCTURES AGAINST EARTHQUAKE LOAD, Study on Disaster Mitigation: Experiment and Dissemination of Sustainable Cost Effective Houses Against Natural Disasters, Project Code No.:7270, Housing and Building Research Institute, Mirpur, Dhaka, 2013.
    Sponsor: The Ministry of Housing and Public, Works, Government of the People's Republic of Bangladesh.

  4. REQUIREMENT OF ROLLED STEEL W SHAPES FOR MULTISTORIED STEEL BUILDING IN BANGLADESH, 2015.
    Sponsor: BSRM, Bangladesh

  5. HIGH STRENGTH REBAR FOR CONCRETE STRUCTURES IN BANGLADESH, 2015
    Sponsor: BSRM, Bangladesh

  6. CLIMATE RESILIENT CONCRETE STRUCTURES IN MARINE ENVIRONMENT OF BANGLADESH, Research for Community Access Partnership (ReCAP), in Partnership with LGED, Bangladesh, 2016
    Sponsor: UKAid, UK

  7. BOND BEHAVIOR OF THREADBAR REINFORCING STEEL IN ACCORDANCE WITH BS4449, 2019
    Sponsor: BSRM, Bangladesh

 

THESES

  • Amanat, K.M.- A Design Rationale for Free Standing Stair Slabs Based on Finite Element Analysis, MSc thesis, Department of Civil Engineering, BUET, Bangladesh, Sept. 1993.

  • Amanat, K.M. - Gradient Plasticity Modeling for the Fracture and Strain Localization of Early Age Concrete, PhD Thesis, Department of Civil Engineering, Nagoya University, Japan, March, 1997.

 

 

Last update: March 2019